Skip to content

Temperature Transmitter – External Contact Probe Wireless Mbus

€178,95
SKU 800-022

This Enless Wireless IP65 transmitter with an external temperature contact probe allows you to measure temperatures (°C data) in a remote manner, on contact with surfaces.

The robustness of our transmitter – IP 65 housing – and its high environmental tolerance (probe temperature range -30°C / +100°C) allow it to withstand any type of “outdoor” environment, sometimes under extreme conditions.

This temperature transmitter is suitable for many applications including :

  • Monitoring of temperatures on inlet/outlet fluid circuits of all types¬†and, in particular, continuous observation of¬†sanitary hot water networks¬†for preventing the health risk of legionella. Maintenance and operation of heat pumps.
  • Temperature monitoring in cold rooms, cooling towers, refrigerated outdoor containers (chemical, agri-food industries, etc.)
  • Cold chain management¬†applied to drug storage and temperature control in hospital environments, housing structures for ageing and/or vulnerable populations.
  • Supervision of HVAC¬†(heating, ventilation, air conditioning).

High-precision °C data is retrieved using the contact probe and transmitted to the Enless Wireless Modbus receiver connected to a gateway at a pre-configured flexible periodicity. Where high and low temperatures are exceeded, alerts are stored in the Modbus table of the PLC and can be viewed via a specific supervision system.

This product incorporates high-performance D-type battery and gives the Enless transmitter a very high autonomy of up to 15 years.

 If you need help selecting your wireless sensors please read our 5 min guide.

Battery Life

 Enless Wireless MBus Product Range Battery Autonomy



Technical Specifications

 

Dimensions L 118 x H 79 x W 43 mm
Enclosure and IP rating ABS IP 65
Power supply Replaceable D 3.6 V Lithium battery - Low battery alert
Battery autonomy / Periodicity 5 years battery life with 5mn periodicity / Configurable periodicity from 1 to 250 min
Configuration / Installation Radio - Field Configuration Tool (F.C.T. software)
Type of sensor Contact probe 2 wires PT 100 – cable lenght : 1,5m
Contact probe working temperature - 30°C / +100°C
Sensor accuracy +/- 0,5°C
Sensor resolution 0,01°C
LEDs 3 LEDs
Certification CE

 

Do you have a question about this product

Documentation & Downloads for TSI-1 Multi-functional split Modbus interface  style=

Recently Viewed Items