Temperature Transmitter ‚Äì External Contact Probe Wireless Mbus
This Enless Wireless¬†IP65 transmitter with an external temperature contact probe¬†allows you to¬†measure temperatures (¬∞C data) in a remote manner, on contact with surfaces.
The robustness of our transmitter ‚Äì IP 65 housing ‚Äì and its¬†high environmental tolerance (probe temperature range -30¬∞C / +100¬∞C)¬†allow it to withstand any type of ‚Äúoutdoor‚Äù environment, sometimes under extreme conditions.
This temperature transmitter is suitable for many applications including :
- Monitoring of temperatures on inlet/outlet fluid circuits of all types¬†and, in particular, continuous observation of¬†sanitary hot water networks¬†for preventing the health risk of legionella. Maintenance and operation of heat pumps.
- Temperature monitoring in cold rooms, cooling towers, refrigerated outdoor containers (chemical, agri-food industries, etc.)
- Cold chain management¬†applied to drug storage and temperature control in hospital environments, housing structures for ageing and/or vulnerable populations.
- Supervision of HVAC¬†(heating, ventilation, air conditioning).
High-precision ¬∞C data is retrieved using the contact probe and transmitted to the Enless Wireless Modbus receiver connected to a gateway at a pre-configured¬†flexible periodicity.¬†Where high and low temperatures are exceeded, alerts are stored in the Modbus table of the PLC and can be viewed via a specific supervision system.
This product incorporates¬†high-performance D-type battery¬†and gives the Enless transmitter a¬†very high autonomy of up to 15 years.
¬†If you need help selecting your wireless sensors please¬†read our 5 min guide.
|Dimensions||L 118 x H 79 x W 43 mm|
|Enclosure and IP rating||ABS IP 65|
|Power supply||Replaceable D 3.6 V Lithium battery - Low battery alert|
|Battery autonomy / Periodicity||5 years battery life with 5mn periodicity / Configurable periodicity from 1 to 250 min|
|Configuration / Installation||Radio - Field Configuration Tool (F.C.T. software)|
|Type of sensor||Contact probe 2 wires PT 100 ‚Äì cable lenght : 1,5m|
|Contact probe working temperature||- 30¬∞C / +100¬∞C|
|Sensor accuracy||+/- 0,5¬∞C|
Do you have a question about this product