Skip to content
Digital Input Transmitter Sigfox

Digital Input Transmitter Sigfox

£114.78 GBP
SKU 100-012

This contact/status change transmitter is specifically designed for smart building, security and industrial applications.

It meets all types of ON/OFF status change monitoring needs thanks to its two TOR inputs (binary output signal).

The main uses of contact transmitter monitoring are :

  • Presence, break-in and access control :
    –> Monitoring of door openings and closures in office environments, or security gates in industrial areas (warehouses, machine access, etc.).
  • Monitoring of machines and systems :
    –> Detection of system failures, monitoring of machine operating times, level alerts, etc.

The robustness of our transmitter – IP 65 enclosure – and its high environmental tolerance (-20°C / +55°C) allow it to withstand any type of environment.

Real-time alerts from the Enless Wireless contact/status change transmitter via its two dry contact interfaces will allow you to implement quick actions in response to the received messages.

This “High Power” device incorporates powerful D-type batteries, giving the Enless transmitter a very high autonomy of up to 15 years.

 If you need help selecting your wireless sensors please read our 5 min guide.

Technical Specifications

 

Dimensions L 118 x H 79 x W 43 mm
Enclosure and IP rating ABS IP 65
Power supply Replaceable D 3.6 V Lithium battery - Low battery alert
Battery autonomy / Periodicity 5 years battery life with 20mn periodicity / Configurable periodicity
Configuration / Installation Radio via downlink - from Sigfox Backend or APIs
Interface 2 dry contacts
Inputs 2 dry contacts - terminal block
LEDs 3 LEDs
Advanced features Alarms and remote configuration
Certification CE

 

All Enless Wireless Sigfox products incorporate an advanced configuration mode that allows you to optimise their battery performance and facilitate their use :

> You can set high and low alarm thresholds for your transmitter and have your transmitter wake up frequently and take a measurement. If the threshold is exceeded, your transmitter can send an alert frame immediately without waiting for its next shipment.
> You can remotely change your transmitter configuration from the Sigfox Backend without manual intervention or the need to restart the transmitter to take its new configuration.

 

Do you have a question about this product?






Recently Viewed Items