IoT/BMS Industrial Dual SIM 4G Router with WiFi and 4 Ethernet Ports RUT950
About the product
We know how unpleasant and costly it is when you have to travel to site to check the controls, whenever something goes wrong. We also know that the lack of Internet when you are actually on site.
Hence we have partnered with Teltonika so we can offer you the most advanced, industrial IoT routers.
With this router RUT950, you will be able to connect to any remote site without spending your time and budget.
The RUT950 is an industrial dual SIM router used in the controls and IoT industry which allows you to have constant internet connectivity everywhere you go.
When installed on-site, it will allow you to have internet access to your controls equipment whether you are using a Jace 8000 or any other WiFi-enabled controller.
With the RUT950 router you will be able to:
- Have a dual SIM router which will give a safe and permanent connection to the internet for your laptop, so you never have to worry about lack of connectivity, even if you are in the basement of a building.
- Have a safe and easy way to connect to any remote site and run a diagnosis, thus avoiding unnecessary travel.
- Have a safe and fully documented and supported way of moving metering data from a site into the cloud without any BMS.
So if you are looking to avoid a stressful visit to the site or being without an internet connection when you need it most, then this is for you.
With the RUT950 you get stable internet wherever you go.
You can deploy it on any site to monitor the status of your controls in real-time, extract data, modify setpoints etc.
You will also be able to extract metering data directly using Modbus IP and MQTT. Have a look at this article we prepared for you.
The RUT950 is fully documented and supported by Innon.
RUT950 is a compact industrial 4G (LTE) router equipped with 4x Ethernet ports, WiFi, Dual-SIM and RutOS software for advanced networking solutions.
- RUT950 is a high-performance industrial 4G LTE Wi-Fi router designed as a Main/Backup internet source and guarantees a reliable internet connection with high data throughput and data redundancy.
-Compatible with the Teltonika Networks Remote Management System (RMS) for easy and secure monitoring.
-It has four Ethernet ports, two external SIM holders, digital I/O, and signal strength status LED indicators.
-Powered by RutOS - a unified operating system for all Teltonika Networks routers, this device is highly secure and customizable.
|Mobile module||4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps|
|SIM switch||2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection|
|Status||Signal strength, SINR, RSRP, RSRQ, Bytes sent/received|
|Bridge||Direct connection (bridge) between mobile ISP and device on LAN|
|Passthrough||Router assigns its mobile WAN IP address to another device on LAN|
|SMS||SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP|
|Black/White list||Operator black/white list|
|Multiple PDN (optional)||Possibility to use different PDNs for multiple network access and services|
|Band management||Band lock, Used band status display|
|Wireless mode||IEEE 802.11b/g/n, Access Point (AP), Station (STA)|
|WiFi||WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter|
|WiFi security||WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation|
|SSID||SSID stealth mode and access control based on MAC address|
|WiFi users||Up to 100 simultaneous connections|
|Wireless Hotspot||Captive portal (Hotspot), internal/external Radius server, built in customizable landing page|
|WAN||1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX|
|LAN||3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX|
|Routing||Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)|
|Network protocols||TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)|
|VoIP passthrough support||H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets|
|Connection monitoring||Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection|
|Firewall||Port forward, traffic rules, custom rules|
|DHCP||Static and dynamic IP allocation, DHCP Relay|
|QoS / Smart Queue Management (SQM)||Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e|
|DDNS||Supported >25 service providers, others can be configured manually|
|Network backup||VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover|
|Load balancing||Balance your internet traffic over multiple WAN connections|
|NetSnapper (optional)||Mobile connection management, data compression VPN client (not available in standard FW)|
|SSHFS (optional)||Possibility to mount remote file system via SSH protocol (not available in standard FW)|
|Authentication||Pre-shared key, digital certificates, X.509 certificates|
|Firewall||Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T|
|Attack prevention||DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)|
|WiFi security||WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation|
|VLAN||Port based and tag based VLAN separation|
|Mobile quota control||Set up custom data limits for both SIM cards|
|WEB filter||Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only|
|Access control||Flexible access control of TCP, UDP, ICMP packets, MAC address filter|
|OpenVPN||Multiple clients and server can be running simultaneously, 12 encryption methods|
|OpenVPN Encryption||DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC|
|IPsec||IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)|
|PPTP, L2TP||Client/Server services can run simultaneously|
|Stunnel||Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code|
|SSTP||SSTP client instance support|
|MODBUS TCP SLAVE|
|Allow Remote Access||Allow access through WAN|
|Custom registers||Modbus TCP custom register block requests, which read/write to a file inside the router, and can be used to extend Modbus TCP Slave functionality|
|MODBUS TCP MASTER|
|Supported functions||01, 02, 03, 04, 05, 06, 15, 16|
|Supported data formats||8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float (Big endian, Big endian with byte-swapped, Little endian, Little endian with byte-swapped)|
|MODBUS DATA TO SERVER|
|Protocol||HTTP(S), MQTT, Azure MQTT|
|MQTT gateway||Allows sending commands and receiving data from Modbus Master through MQTT broker|
|MONITORING & MANAGEMENT|
|WEB UI||HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log|
|FOTA||Firmware update from server, automatic notification|
|SSH||SSH (v1, v2)|
|SMS||SMS status, SMS configuration, send/read SMS via HTTP POST/GET|
|Call||Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off|
|TR-069||OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem|
|MQTT||MQTT Broker, MQTT publisher|
|SNMP||SNMP (v1, v2, v3), SNMP trap|
|JSON-RPC||Management API over HTTP/HTTPS|
|MODBUS||MODBUS TCP status/control|
|RMS||Teltonika Remote Management System (RMS)|
|Cloud of Things||Allows monitoring of: Device data, Mobile data, Network info, Availability|
|ThingWorx||Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type|
|Cumulocity||Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP|
|Azure IoT Hub||Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server|
|CPU||Atheros Wasp, MIPS 74Kc, 550 MHz|
|RAM||128 MB, DDR2|
|FLASH memory||16 MB SPI Flash|
FIRMWARE / CONFIGURATION
|WEB UI||Update FW from file, check FW on server, configuration profiles, configuration backup, restore point|
|FOTA||Update FW/configuration from server|
|RMS||Update FW/configuration for multiple devices|
|Keep settings||Update FW without losing current configuration|
|Operating system||RutOS (OpenWrt based Linux OS)|
|Supported languages||Busybox shell, Lua, C, C++|
|Development tools||SDK package with build environment provided|
|Input||1 x Digital non-isolated input (on 4 pin power connector)|
|Output||1 x Digital open collector output (30 V, 300 mA, on 4 pin power connector)|
|Events||SMS, EMAIL, RMS|
|Connector||4 pin industrial DC power socket|
|Input voltage range||9 – 30 VDC (4 pin industrial socket), reverse polarity protection; surge protection >31 VDC 10us max|
|PoE (passive)||Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards|
|Power consumption||< 2 W idle, < 7 W Max|
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
|Ethernet||4 x RJ45 ports, 10/100 Mbps|
|I/O’s||2 Inputs/Outputs pin on 4 pin power connector (available from HW revision 1600)|
|Status LEDs||1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED|
|SIM||2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)|
|Power||4 pin power connector with 2 pins for Input/Output|
|Input/Output||2 programmable Inputs/Outputs|
|Antennas||2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors|
|Reset||Reset/restore to default button|
|Casing material||Aluminium housing, plastic panels|
|Dimensions||100 x 110 x 50 mm (L x W x H)|
|Mounting options||DIN rail (can be mounted on two sides), flat surface placement|
|Operating temperature||-40 °C to 75 °C|
|Operating humidity||10% to 90% non-condensing|
|Ingress Protection Rating||IP30|
|REGULATORY & TYPE APPROVALS|
|Regulatory||CE/RED, FCC, IC, PTCRB, RCM, EAC, CCC, RoHS, WEEE, IP rating, Anatel, GCF, TRA approval, REACH, DNV GL, Declaration of Software Security, Thailand NBTC, Ukraine UCRF, WiFi Certified, SDPPI (POSTEL)|
|Standards||Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0 FCC 47 CFR Part 15B (2018), ANSI C63.4 (2014)|
|RS||EN 61000-4-3:2006 + A1:2008 + A2:2010|
|Surge immunity (AC Power Line)||EN 61000-4-5:2006|
|Surge immunity (Ethernet ports)||EN 61000-4-5:2014, clause 7.1 of ITU-T K21|
|Transient and surges||ISO 7632-2:2004|
|Standards||EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1 AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017 FCC 47 CFR Part 15C, FCC 47 CFR Part 22H, FCC 47 CFR Part 24E, FCC 47 CFR Part 27|
|Standards||IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013 AS/NZS 60950.1:2015 EN 50665:2017, EN 62311:2008 FCC 47 CFR Part 1 1.1310|
|Ingress Protect||LST EN 60529:1999+A1+AC:2002|
STANDARD PACKAGE CONTAINS
- Router RUT950
- UK PSU
- 2 x LTE antennas (swivel, SMA male)
- 2 x WiFi antennas (swivel, RP-SMA male)
- Ethernet cable (1.5 m)
- QSG (Quick Start Guide)
- Packaging box
Documentation & Downloads
|Quick Start Guide|
What Shipping Methods are Available?
How Can I Return A Faulty Product?
How Do I Track My Order?
How can I place an Order?
You can place an order online and pay by credit/debit card if you do not have a Trading Account.
You can please your order online and pay by Trading Account if you have a Business Trading Account.
To open a Business Trading Account please fill in this form and send it back to firstname.lastname@example.org