MX-3 Data Logger GPRS + Data Req (KAMSTRUP) (Opto) For data acquisition from KAMSTRUP meters. + USB

About the product

MX-3 is GPRS Data logger with Modbus and M-Bus compatibility

The MX-3 data logger allows reading of Modbus and M-Bus devices, analog inputs and register the data and sending it to remote users / server through Modbus GPRS modem. It also provides SMS sending services for alarm events.  Data logger can read Kamstrup, Sensus, DIEHL, Danfoss, Itron, Landis & Gyr and other meters (like exotic meters / industrial meters). Also MX-3 can control and read other controllers like Danfoss ECL 300.

Technical Features

 - Possibility to choose interfaces: M-Bus, GSM/GPRS, RS232, RS485, Data/Req, USB, Analog and Discrete input ports
 - Reading data from any kind of meters (water, electricity, heat, gas, cooling ...) and controllers
 - Supported protocols: Modbus RTU, Modbus TCP/IP, M-Bus, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:200 and transparent
 - Independent data log with real time stamp (Real Time Clock)
 - Remote communication and updates through GSM/GPRS
 - Up to 4 Discrete inputs
 - Up to 3 Analog inputs
 - SMS sending for alarm events
 - Additional special transparent protocol data transfer
 - Galvanically isolated interfaces and power supply
 - Batteries management. The remote monitoring devices can charge the battery and use it to power supply in the event of blackout

Application possibilities

Data logger MX-3 is dedicated for real time logging and analyzing of data. Using GPRS/GSM, logger sends data to remote users / server. Data Logger MX-3 can also communicate with other controllers and sensors. Device has wide range of optional interfaces and protocols and can read any kind of meters, controllers and sensors equipped with standard protocols. Perfect for telemetry/monitoring, control and smart metering.

Documentation & Downloads

n/a

FAQ