Skip to content

Pulse Transmitter Sigfox - LED Optical Reader

£205.34 GBP
SKU 100-011

This pulse meter transmitter works by reading and transcribing pulsed LED flashes and is therefore compatible with electric meters (e.g., EDF/Enedis/Linky) with light diodes.

This radio transmitter allows the remote reading of the electric consumption data from the meter to which it is connected without any manual intervention. High-precision data is transmitted in radio mode to the Sigfox Cloud at a flexible frequency, configured in advance.

In other words, this transmitter will quickly and economically transform your conventional electric or water meter into a smart meter.

Thanks to the LED optical reading head, the connection to the meter is simplified and requires only a few seconds.

Continuous monitoring of your electricity and water consumption thanks to our Pulse meter transmitter will allow you to :

  • drive your energy (water, electricity…) consumption
  • monitor your equipment and detect leaks or electrical breakdowns
  • prevent over-consumption

Optimising management of your consumption will allow you to achieve significant cost savings regardless of the size of your company and sector of activity.

This product incorporates high-performance D-type battery and gives the Enless transmitter a very high autonomy of up to 15 years.

 

Technical Specifications

 

Dimensions L 118 x H 79 x W 43 mm
Enclosure and IP rating ABS IP 65
Power supply Replaceable D 3.6 V Lithium battery - Low battery alert
Battery autonomy / Periodicity 5 years battery life with 30mn periodicity / Configurable periodicity
Configuration / Installation Radio via downlink - from Sigfox Backend or APIs
Interface Led flash optical reader
Pulse type LED Flash
Inputs 1 pulse input
LEDs 3 LEDs
Advanced features Alarms and remote configuration
Certification CE

 

All Enless Wireless Sigfox products incorporate an advanced configuration mode that allows you to optimise their battery performance and facilitate their use :

> You can set high and low alarm thresholds for your transmitter and have your transmitter wake up frequently and take a measurement. If the threshold is exceeded, your transmitter can send an alert frame immediately without waiting for its next shipment.
> You can remotely change your transmitter configuration from the Sigfox Backend without manual intervention or the need to restart the transmitter to take its new configuration.

 

Do you have a question about this product?


Recently Viewed Items