Skip to content
Setup this Freely Programmable FCU controller in just 10 seconds

Setup this Freely Programmable FCU controller in just 10 seconds

so you can deliver faster and easier than ever before.

You can setup this Fan Coil Controller in 10 seconds... with one little screwdriver


...We know so well the challenges of delivering a fan coil upgrade project from pricing all the way to compatibility, hence when these fan coil controllers were designed we made sure they were going to be exactly like you would want them: super simple to install... plug and play... preconfigured for more than 90% of the most popular fan coil configurations.

...They come shipped with a standard software application with multiple default configurations selectable via DIP switches... so basically you can set the fan coil controller without any software configuration... just by selecting the correct DIP switch configuration... check the full application manual here.

...If any modifications are required then they are freely programmable and the standard application can be quickly modified real time using the Sedona Engineering tool via the USB port, Bacnet or Modbus network.

Previous article Tridium Forum in full swing... come join us we are next to Tridium Stand
Next article Tridium Niagara Forum 2017 London

Leave a comment

Comments must be approved before appearing

* Required fields