CR-IO-16DI-RS
Description
The Core IO is a reliable and easily configured distributed I/O module range compatible with any Modbus controller. You can configure the CR-IO-16DI-RS easily via the dedicated Android app. All you need is an Android device with a camera and Bluetooth. Once you have installed the dedicated app, open it up and scan the QR code on the device located next to the power supply. Once the QR code has been recognised the app will connect to the device and you will be able to start configuration. You can also configure the CR-IO-16DI-RS via Modbus. Please see the manual for full instructions.
Features
- RS-485 connection
- 16 digital inputs
- Configurable inputs for pulse counting and sensor / logic detection
- Opto-isolated RS485 building automation controller port.
Technical Specifications
| Power Supply | 24 Vac: +10% / −15% |
| 50 Hz 24 Vdc: +10% / −15% | |
| Digital Inputs | 16 x digital input channels |
| DI direct, DI reverse, PULSE (up to 100 Hz, 50% duty cycle, max 50 ohm contact) | |
| Interface to BMS | Opto-isolated, max 63 devices supported on the network (all versions) |
| Ethernet/IP (IP version only) | |
| Protocol to BMS | Modbus RTU, baud rate 4800–230400, 8 bit, no parity, 1 stop bit (all versions) |
| Modbus TCP (IP version only) | |
| Ingress Protection Rating | IP 20, EN 61326-1 |
| Temperature and Humidity | Operating: 0°C to +50°C / 32°F to 122°F, max 95% RH (without condensation) |
| Storage: −25°C to +75°C / −13°F to 167°F, max 95% RH (without condensation) | |
| Connectors | Plug-in terminals, 1 × 2.5 mm² |
| Mounting | Panel mounted (2 × rear sliding screw holders on the back) / DIN rail mounting |
Delivery & Support
Delivery Information
For UK clients, we deliver all goods ordered by 14:00 on the next working day.
Support
If you have any questions about this product or need guidance choosing the right solution, our technical sales team is here to help. You can also explore detailed resources on our downloads site.
Delivery times
For uk clients we deliver all goods ordered by 14:00 in the next working day.