Skip to content
iSMA-B-MIX18

iSMA-B-MIX18

SKU iSMA-B-MIX18
by iSMA
Availability:
Available
Request a quote
€354,95 - €354,95
€354,95
€354,95 - €354,95
€354,95
About the product

One of the most easy to setup and most flexible IO Modules on the market. This module provides the best value per point with the lowest footprint and will make you deliver any BMS project on time and budget.

The iSMA-B-MIX18 of the MIX series has been designed for building distributed control systems using JACE or AAC20 devices. All the MIX Series modules have been equipped with the most commonly used types of I/O in building automation (MIX of all types of I/O in one unit). This module is factory-equipped with the two most popular open communication protocols: Modbus (ASCII, RTU) and BACnet (MSTP), which are selected using DIP switches.

This module is fully compatible with any Modbus or Bacnet system including the following: Tridium Jace3, Jace6, Jace8000Compatible,Trend IQ3, IQ4 Bacnet IPCompatible,Siemens PX range,Cylon Bacnet controllers,Schneider Electric StruxureWare Bacnet controllers,OSS NeOSS building management controller,Priva Blue ID,Distech EC Bos,DELL EDGE GATEWAY 5000,Compatible with any Honeywell Centraline Hawk,Delta Controls Compatible IO Modules

Inputs & Outputs

5xUniversal Inputs (5UI)
All universal inputs have 16-bit resolution which support the following types of inputs:
  • Temperature input support the following types of sensors: 10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1, Pt1000, Ni1000
  • For sensor Pt1000 and Ni1000 use only 16bit resolution
  • Voltage input 0-10VDC: input resistance 100k accuracy 0,1% measurement resolution 3mV@12bit and 1mV@16bit
  • Current input 0-20mA -Required external resistor: 200 , sold separately
  • Resistive input 0-1000k: measurement resolution for 20k load 20@12bit and 1@16bit
  • Dry contact input
5xDigital Inputs (5DI)
  • Dry contact inputs
  • Fast pulse counter up to 100Hz
4xAnalog Outputs (4AO)
All analog outputs are equipped with 12-bit ADC provides10 mV resolution and accuracy less than 0,5%. They support the following output types:
  • Output 0-10V DC maximum load up to 20mA
  • PWM: 0,01Hz, 0,1Hz, 1Hz, 10Hz, 100Hz
4xDigital Outputs (4DO)
  • Relay output (NO) max. 3A, 250 VAC/30 VDC
Platform
  • Cortex-M3
Communication
  • Interface RS485 half duplex
  • Up to 99 devices on the bus
  • Protocols: MODBUS or BACnet
  • Baud rate: 2400 to 115200 bps
Power supply
  • 24V AC/DC
Housing
  • Dimension: 88x110x62 mm.
  • Construction: plastic, self-extinguishing (PC/ABS)
  • DIN rail mounting (DIN EN 50022 norm)
  • Cooling: internal air circulation
Environments
  • Operating temperature: -10C to 50C
  • Storage temperature: -40C to 85C
  • Relative humidity: 5 to 95%, no condensation
  • Ingress Protection Rating: IP40 for indoor installation

Do you have a question about this product?

Documentation & Downloads for iSMA-B-MIX18

In the DOWNLOAD session you can find:

  • The ISMA driver for Niagara, which contains the ISMA device Palette
  • Isma configurator which is needed for updating firmware and configure modules
  • Templates for Siemens sensors for Niagara (Generic Tabular) - Ni1000 Ohm at 0C - PTC T1 (Resistance/Voltage) - Pt100 Ohm at 0C - Pt1000 Ohm at 0C - Pt1000 Ohm at 0C - Pt1000 Ohm at 0C - Pt1000 Ohm at 0C - Pt1000 Ohm at 0C - Ni100 Ohm at 0C - Ni100 Ohm at 20C - NTC 107 Ohm at 20C - NTC 150 Ohm at 31C - NTC 1 kOhm at 20C - NTC 1 kOhm at 20C - NTC 2 kOhm at 20C - NTC 3850 Ohm at 0C - NTC 500 Ohm at 20C - NTC 575 Ohm at 20C - NTC 8250 Ohm at 19C

For any help please contact our support here

    Delivery times

    For uk clients we deliver all goods ordered by 14:00 in the next working day.