iSMA-B-AAC20-M

About the product

iSMA-B-AAC20-M controller (iSMA-B-AAC20) with M-Bus for up to 20 devices is an advanced device to control building automation and HVAC systems. Use of SVM (Sedona Virtual Machine) allows you to finish the setup quickly and easily. It is ideal for smaller projects where you want to stay open protocol while keeping the development simple and the cost under budget.

The Mbus Interface allows you to pick up max 20 meters.

With the large number of inputs and outputs allows to integrate with other devices and sensors (AAC20 provides 8xUI, 4xDI, 4/6xAO and 4xDO). Its fast processor allows to control of even very large objects. Built-in RS485 can be used to expand number of I/O by connecting MINI or MIX series I/O modules using Modbus ASCII/RTU. In addition, to increase the versatility of the controller, it supports many open communications protocols like: BACnet, Modbus, SOX, DALI, M-Bus, 1-wire or oBIX (optional). AAC20 is mounted in a housing adapted for DIN rail mounting or directly on a panel. Separate, easy to remove connectors allow quick wiring without removing the entire module.

Inputs & Outputs
8xUniversal Inputs (8UI)
All universal inputs have 16-bit resolution which support the following types of inputs:

• Temperature input support the following types of sensors: 10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1, Pt1000, Ni1000

For sensor Pt1000 and Ni1000 use only 16bit resolution

• Voltage input 0-10VDC: input resistance 100kΩ accuracy ±0,1% measurement resolution 3mV@12bit and 1mV@16bit
• Current input 0-20mA (external resistor 499Ω required)
• Resistive input 0-1000kΩ: measurement resolution for 20kΩ load 20Ω@12bit and 1Ω@16bit
• Dry contact input

4 x Digital Inputs (4DI)

• Dry contact inputs
• Fast pulse counter up to 100Hz

4/6 x Analog Outputs (4/6AO)
All analog outputs are equipped with 12-bit ADC provides10 mV resolution and accuracy less than ±0,5%. They support the following output types:

• Output 0-10V DC maximum load up to 20mA(5mA- AO6)
• PWM: 0,01Hz, 0,1Hz, 1Hz, 10Hz, 100Hz

AO5 and AO6 can only be used if 1-wire port is not in use, please notice for AO6 maximum current load is up to 5mA
4 x Digital Outputs (4DO)

• Relay output (NO) max. 3A, 250 VAC/30 VDC

Platform

• ARM Cortex-M4 204MHz
• ARM Cortex-M0 204MHz

Communication

• Interface RS485 half duplex
• Baud rate: 2400 to 115200 bps
• 2xEthernet with built in switch
• 1-Wire Interface
• Micro SD card slot
• USB Host Interface
• Protocols: Modbus, BACnet, 1-wire, oBIX

Power supply

• 24V AC/DC

Housing

• Dimension: 106x110x62 mm.
• Construction: plastic, self-extinguishing (PC/ABS)
• DIN rail mounting (DIN EN 50022 norm)
• Cooling: internal air circulation

Environments

• Operating temperature: -10°C to 50°C
• Storage temperature: -40°C to 85°C
• Relative humidity: 5 to 95%, no condensation
• Ingress Protection Rating: IP40 – for indoor installation

Save time and find out what IO need for your project:

Make sure you get the latest discounts and prices register here:

Documentation & Downloads

iSMA-B-AAC20-M Instalation instruction

iSMA-B-AAC20 Datasheet

	iSMA-B-AAC20 User Manual Platform
	iSMA-B-AAC20_Control_kit
	iSMA-B-AAC20 Manual M-Bus
	iSMA-B-AAC20_Kit_Advance_Control
	iSMA-B-AAC20_Manual_Mail_service
	iSMA-B-AAC20_Manual_NTPClient
	iSMA-B-AAC20_Manual_Weather

	iSMA-B-AAC20 Modbus
	iSMA-B-AAC20 BACnet
	iSMA-B-AAC20 Quick Engineering Guide
	iSMA-B-AAC20 Software Bundle
	Niagara_3.8_modules
	Mechanical drawing iSMA-B-AAC20-M
	iSMA-B-AAC20 Release Note
	iSMA-B-AAC20_Declaration_of_Conformity

In the DOWNLOAD session you can find:
The ISMA driver for Niagara, which contains the ISMA device Palette
ISMA configurator which is needed for updating firmware and configure modules

For any help please contact our support here